info@armadahvac.com (202) 578-8764
Cooling Services AC Repair AC Installation & Replacement AC Maintenance Ductless Mini Splits Heating Services Heating Repair Heating Maintenance Heating Installation & Replacement Plumbing Services Commercial Service Areas About Us Schedule Service

Heating Installation & Replacement
in DC, Maryland & Virginia

Whether you're installing a new system or replacing an aging unit, Armada delivers expert heating installation with top rated equipment, proper sizing, and results built to last through DMV winters.

Licensed & Insured
Upfront Pricing
All Major Brands
Manufacturer Warranty
Expert Install Team

The Right System, Installed Right

Choosing a new heating system is one of the most important investments you'll make in your home. The right equipment — properly sized and professionally installed — can cut your energy bills, keep your family comfortable for 15–20 years, and eliminate the stress of constant repairs.

Armada's certified heating installers serve DC, Maryland, and Virginia homeowners with honest guidance, top brand equipment, and installations backed by a full manufacturer warranty.

Proper load calculations — no oversizing or undersizing
Old system removal and disposal included
Smart thermostat setup and full system testing
Manufacturer warranty registration handled for you

New System at a Glance

15+
Year lifespan for a properly installed heating system
30%
Potential energy savings vs. an older, inefficient system
1 Day
Typical installation time — most jobs completed same day
100%
Licensed installation — all permits and code compliance handled

Should You Repair or Replace?

Not sure whether to fix your current system or invest in a new one? Here's a simple breakdown to help you decide.

Consider Repairing Repair

  • Your system is less than 10 years old
  • The repair cost is less than 50% of a new system
  • Your unit has been well maintained and runs reliably
  • The issue is a single, isolated component
  • Your energy bills haven't significantly increased

Consider Replacing Replace

  • Your system is 15 or more years old
  • Repair costs are high and breakdowns keep recurring
  • Your energy bills have been steadily climbing
  • Your home has uneven heating or persistent cold spots
  • Your system uses outdated technology or refrigerant

What's Included in Every Installation

When Armada installs your new heating system, we handle every detail — from the first measurement to the final test run.

In Home Assessment

We visit your home, assess your space and existing ductwork, and calculate the exact system size needed for your home.

Load Calculation & Sizing

We perform a Manual J load calculation to ensure your new system is sized correctly — maximizing efficiency and comfort.

Professional Installation

Our certified technicians install your system to manufacturer specifications, ensuring full warranty coverage and peak performance.

Old System Removal

We safely disconnect, remove, and dispose of your old heating system — you don't have to worry about a thing.

Smart Thermostat Setup

We install and configure your thermostat — including smart/programmable models — and walk you through how to use it.

Testing & Warranty Registration

We test every function, confirm proper operation, and register your manufacturer warranty so your coverage starts immediately.

Heating Systems We Install

From gas furnaces to heat pumps and everything in between, Armada installs every major type of residential heating system in the DMV area.

Gas Furnaces

High efficiency gas furnaces deliver powerful, consistent heat at a lower operating cost. Ideal for the cold DC, MD, and VA winters.

Electric Furnaces

A reliable, ductwork compatible option for homes without gas lines — clean operation with no combustion concerns.

Heat Pumps

Energy efficient systems that provide both heating and cooling from a single unit — an excellent year round solution for the DMV climate.

Dual Fuel Systems

Combines a heat pump for mild weather with a gas furnace for extreme cold — maximizing efficiency and comfort across all seasons.

Boilers

Hot water or steam boiler installation for homes with radiator or radiant floor heating systems — expert installation and piping.

Ductless Heating

Mini split heat pump installation for homes without ductwork, room additions, garages, and multi zone comfort applications.

We Install All Major Heating Brands

Armada works with every leading manufacturer, so you get the system that's right for your home — not just whatever one brand offers.

Carrier
Infinity & Performance Series
Trane
XR & XC Series
Lennox
Dave Lennox Signature
Goodman
GMVC & GSXC Series
Rheem
Prestige & Classic Series
York
Affinity & LX Series
Bryant
Evolution & Preferred Series
American Standard
Platinum & Gold Series

The Armada Difference

When you invest in a new heating system, the installer matters just as much as the equipment. Here's what sets Armada apart.

Certified Installation Technicians

Our team holds all required DC, Maryland, and Virginia contractor licenses and is factory trained on the brands we install — so your warranty stays intact.

Proper Load Calculations

We never guess on system size. A Manual J load calculation ensures your new heater is perfectly matched to your home — not oversized or undersized.

Honest System Recommendations

We'll tell you what you actually need — not the most expensive option. Our goal is the right system for your home and budget, period.

Clean, Respectful Installation

Our installers treat your home with care, work cleanly, and leave no mess behind. We route everything neatly and explain the work as we go.

Full Manufacturer Warranty

We register your equipment and ensure your manufacturer warranty is fully activated. If anything goes wrong, you're covered — and we'll handle it.

Local DMV Expertise

We know the heating demands of DC, Maryland, and Virginia winters and design every installation with the local climate in mind.

Our Installation Process

Getting a new heating system installed by Armada is straightforward. Here's what to expect from start to finish.

1

In Home Consultation

We visit your home, assess your current system, and discuss your comfort goals and budget before recommending anything.

2

System Design & Quote

We calculate the right system size and type, present your options clearly, and provide a detailed, upfront quote.

3

Professional Installation

Our certified team installs your new system to manufacturer specifications — most jobs are completed in a single day.

4

Testing & Walkthrough

We test the full system, confirm everything is running perfectly, and walk you through operation and thermostat settings.

5

Warranty & Ongoing Support

We register your warranty, schedule your first maintenance visit, and remain your go to team for any future service needs.

Heating Installation FAQs

Here are the questions DC, Maryland, and Virginia homeowners ask most often about replacing or installing a heating system.

Most heating systems last 15–20 years with proper maintenance. Key signs it's time to replace: your system is over 15 years old, you've needed two or more significant repairs in recent years, your energy bills are noticeably higher despite normal usage, or your home has persistent hot and cold spots. If your repair estimate exceeds 50% of a replacement cost, replacement almost always makes more financial sense.
Heating system installation costs in DC, Maryland, and Virginia vary based on the system type, brand, and your home's configuration. A gas furnace installation typically ranges from $3,000–$7,000. Heat pump installations range from $4,000–$10,000+. Boilers and specialty systems may run higher. We provide detailed, itemized quotes after an in home assessment so you know exactly what you're investing in before committing.
System sizing is determined by a Manual J load calculation, which accounts for your home's square footage, insulation levels, window area, ceiling height, local climate, and more. Bigger is not better — an oversized system short cycles, reducing efficiency and comfort. An undersized system runs constantly and can't keep up on the coldest days. We perform a proper load calculation for every installation to ensure a perfect fit.
For the DC, Maryland, and Virginia climate, heat pumps — particularly cold climate models — offer excellent efficiency for most of the heating season. A dual fuel system (heat pump paired with a gas furnace) is ideal for maximizing efficiency year round while ensuring powerful heat during the coldest winter days. High efficiency gas furnaces (95%+ AFUE) are also a strong choice for homes with existing gas lines. We'll help you weigh the options for your specific home and budget.
Most standard heating system replacements — including a furnace or heat pump swap — are completed in a single day (4–8 hours). More complex installations involving ductwork modifications, boiler piping, or multi zone systems may take 1–2 days. We'll give you a precise time estimate during your consultation, and we work efficiently so your home isn't without heat for longer than necessary.
Yes — all new heating systems installed by Armada come with the manufacturer's equipment warranty, which typically covers parts for 5–10 years (and up to lifetime on heat exchangers for some brands). Our installation labor is also warranted. We handle warranty registration for you so your coverage starts immediately and you don't have to deal with paperwork after the job is done.

Ready for a New Heating System?

Get an honest assessment and upfront quote from Armada's certified heating installation team. No pressure — just expert guidance and quality work.

Schedule a Consultation Call (202) 578-8764

Schedule Your Heating Installation

Ready to invest in a new heating system? Fill out the form and we'll schedule your in home assessment at a time that works for you.

Schedule Your Service